Validation of valve prototypes
Prototype ball valve validation for open-flow ratio to operate under specified design conditions. Different degrees of opening were simulated to make the characteristic curve of the valve. The results allowed to verify if the performance of the valve was the desired, since the discharge of the nominal flow met the restrictions imposed.
- Fluid dynamics 82% 82%
- CFD simulations 85% 85%
- CAD Design 90% 90%
- Calculation of pressure drop 92% 92%
- Geometrical parameterization 88% 88%
Prototype ball valve validation for open-flow ratio to operate under specified design conditions.
Type of study